Pick your deck board. Get the CAMO system that's right for you.

Hardwood

Don’t blemish the surface of square hardwood decking. Preserve its beauty and achieve a fastener-free surface on Ipe, Cumaru, Tigerwood, Kebony, Angelique, and Merbau decking by using the MARKSMAN Pro® tool and CAMO Edge Screws. The tool automatically creates 3/16 in. spacing between boards while the screws secure the board through the edge. Given the density of the boards, be sure to pre-drill holes before fastening. You can also use the CAMO LEVER® to straighten and lock your board into place.

Products used with this material

Any board, any joist, straighten warped boards, and lock-in rows of grooved boards and clips with the LEVER® board bending tool that sets in one turn.

See product >>

MARKSMAN Pro® Tool

The MARKSMAN Pro® Tool clamps to the board and creates a 3/16 in. (5mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product >>

Pre-Drill Bit

Use the Pre-Drill bit to drill a hole before fastening hardwood and capped composite boards with Stainless Steel Edge deck screws.

See product >>

Edge Deck Screws

Pair the patented rake tip screws with a MARKSMAN tool to install a fastener-free surface easily and affordably.

See product >>

Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.

GET CAMO